فهرست
Soft water pressure control dials for the elderly and children.
Eco-friendly hose material that can be used safely to the human body.
A future refinded jet_tip & jet tip hanger with a refreshing look.
Soft water pressure control dials for the elderly and children.
Eco-friendly hose material that can be used safely to the human body.
A future refinded jet_tip & jet tip hanger with a refreshing look.
The powerful pulses of the Aquapick (An average of 2,200 round trips per minute) clean up any leftovers from beyond the reach of the toothbrush.
The powerful pulses of the Aquapick (An average of 2,200 round trips per minute) clean up any leftovers from beyond the reach of the toothbrush.
22 out of 3 people go through periodontal disease
It needs to be managed.
Source: Health Insurance Review & Assessment Service (2016)
Unit: 1.000.000 KRW
Source: Health Insurance Review & Assessment Service (2016)
Unit: 1.000.000 KRW
Source: Health Insurance Review & Assessment Service (2016)
Unit: 1.000.000 KRW
Cause of a periodontal disease
Removes food debris while massaging gums gently
Plaque and tartar caused by neglected oral care can cause inflammation, and periodontal disease can also be caused by stress, smoking or poor eating habits
Refers to inflammation of not only the teeth but also the gums surrounding the teeth causing pain
Clinical research institution:
Korean society for oral health (calculated from one-way analysis of variance) calculated from standard deviation of 0.67-1.21.
Research done by:
Professor Gwang-hak Bae (Dental School of Seoul National University)
| SPECIFICATION | |
| Product name | Aquapick oral irrigator |
| Model | AQ-30 |
| Components | Main body, four jet-tips, our jet-tip holders |
| Voltage | 100-230V, 50/60Hz |
| Power | 24W |
| Size | 150*90*210mm |
| Water tank | 600ml |
| Pulsations | 2.200 pulses/min |
Aquapick has passed tests done by more than 100 dentists and received the official recommendation from KDA (Korean Dental Association).
Aquapick is the only company that received this achievement.
The foot contro pedal is desianed ergonomicallv to control all the funtions and it provides high convenience.
Provides sufficient force at low speed (Max torque 55Ncm) : 20:1
Ergonomic comfort grip
ACL(B)-4 116:1/20:1/32:1/64:1 gear ratio
Available for various E-type motors in accordance with ISO standard.
reasonable price and excellent bertormance
134° autoclavable
Resonance Frequency Analysis (RFA) | Tapping Method | AnyCheck |
Resonance Frequency Analysis (RFA) | Damping Capacity Analysis | Damping Capacity Analysis |
Pros – Non-contact measurement with ISQ value | Pros- Convenient measurement of the healing abutment | Equivalent to ISQ ValuesReliable test results with 98% accuracy repeatable results |
Cons– More than 2 minutes per 1 implant- Requires disposable Smart pegs- Inconvenience and risk of unscrewduringaround the the healing process- Measures the bilateral resistance aroundthe implant, not theweakthe the weak theweak stabilityesistance | Cons- Unreliable results affected by different holding angles– Unpleasant tapping for patients- Too frequent tapings (16 times) | Improved tapping motion– Only 3 seconds for 1 implant– Direct contact with the target- Reduced number of tapings (6 times)– Discontinues tapping in case of after less than 60 (ERROR signafter tapping twice) |
AnyCheck is easy to use and control due to its small size and lightweight body design.
AnyCheck can directly measure the implant stability on the healing, stock abutments and one-piece implant.
Measuring time is reduced to 3 seconds with six taps.In case of weak osseointegration, the tapping motion automatically stops after two taps.
The tapping strength is 30% lighter compared to other similar products allowing a safer measurement of implant stability.
The level of osseointegration is measured through IST (Initial Stability Test), which is equivalent to ISQ (Implant Stability Quotient).
AnyCheck is an implant stability meter that measures the stiffness of the alveolar bone implant interface through a tapping motion. AnyCheck reduces the risk of implant failure by indicating the most appropriate time for restoration.
This new device combines the advantages of both the tapping and RFA methods for a superior product.
Resonance Frequency Analysis (RFA) | Tapping Method | AnyCheck |
Resonance Frequency Analysis (RFA) | Damping Capacity Analysis | Damping Capacity Analysis |
Pros– Non-contact measurementwith ISQ value | Pros- Convenient measurement on the healing abutment | Equivalent to ISQ ValuesReliable test results with 98% accuracy repeatable results |
Cons– More than 2 minutes per 1 implant- Requires disposable Smart pegs- Inconvenience and risk to unscrewduring the healing process- Measures the bone density aroundthe implant, not the implant lateralresistance | Cons- Unreliable results affected by different holding angles– Unpleasant tapping for patients- Too frequent tapings (16 times) | Improved tapping motion– Only 3 seconds for 1 implant– Direct contact with the target- Reduced number of tapings (6 times)– Discontinues tapping in case of weakstability less than 60 (ERROR signafter tapping twice) |
Turn on AnyCheck by pressing and holding the POWER button for 3 seconds.
Have the patient sit up before the test.
Slightly contact the healing abutment with the tip of the AnyCheck. Be cautious not to push the healing abutment.
Maintain the contact angle between 0 to 30 degrees.
Gently press the POWER button once and hold the device firmly while measuring the stability.
Check the measured value displayed on the LCD screen.The value will range between 0-99. The smaller the value, the weaker the degree of osseointegration
Turn on AnyCheck by pressing and holding the POWER button for 3 seconds.
Have the patient sit up before the test.
Slightly contact the healing abutment with the tip of the AnyCheck. Be cautious not to push the healing abutment.
Maintain the contact angle between 0 to 30 degrees.
Gently press the POWER button once and hold the device firmly while measuring the stability.
Check the measured value displayed on the LCD screen.The value will range between 0-99. The smaller the value, the weaker the degree of osseointegration
AnyCheck IST Value will show:
– RED (between 30~59) : Poor stability
– ORANGE (between 60~64) : Marginal stability
– GREEN (above 65) : Good stability
Medit has been at the forefront of realizing the easy entry into digital dentistry.
Our innovation will improve your patient’s experience.
How can we develop a product beyond users’ imagination?
How should we incorporate our advanced scanning technology and 20 years of engineering know-how?
100%of patients prefer digital impressions1
28% of dentists already own intraoral scanners 2
12% Number of intraoral scanner owners expected to grow annually 3
We believe that digital dentistry will unleash your clinic’s potential.
Imagine how digital dentistry can change you, your patients, and your lab partners’ lives.
To this end, Medit never stops evolving scanning systems with continuous product upgrades.
Medit i700 makes the scanning experience a comfortable one for both the dentist and patient. With both powerful hardware and intelligent software, the full-feature Medit i700 is the key to unleash your clinic’s full potential.
Unlike the most scanners in the market, Medit i700 can be directly connected to the PC using power delivery cable without power hub and extra cables. This new feature of Medit i700 improves the mobility and the maintenance.
Medit Link is a fully open system for you.
Scan with free intelligent features and apps specialized for your dental procedures. Improve consultation experience with your patient to provide better treatment options. Enhance your communication with labs through a real time cloud-based system.
Medit is one of the fastest companies in the industry to provide software upgrades.
Users can get a renewed scanner with improved performance and new features through software upgrades alone.
Store all data in the cloud. Work on your original scans, archive your digital impressions and orders, manage your cases wherever you are.
Help the patient visualize potential results of an orthodontic treatment.
Remove unnecessary soft tissue data which is one of the biggest challenges when performing scans.
Experience smoother communication, with partners. View scan data on any device and share notes.
All data is stored securely.
Show the patient their future smile or help them envision a braces treatment.
Automatically filter the color out during scanning, reducing the number of artifacts and making retraction easier.
Abutments and scan bodies are automatically matched and aligned with the scan data. Use this function for downstream work such as CAD.
Scan edentulous patients, or the inner surface of the denture. Use wax rims or dentures to perform occlusal alignment.
Choose between allowing the system to automatically generate the margin line for any tooth or create it manually.
Scan your patient’s face, import 3D face data and bone data, and align all these data sets to get a more comprehensive final result.
Get the data from the hard-to-scan areas using an impression, scan it, and combine with the intraoral data.
Conduct a modeless crown fitting. The software can reveal where alterations may be needed.
Your Medit Link open system enables you to use your scan data for all kinds of workflows, with any software that allows the import of STL, PLY and OBJ files. This means that you can use our scan data for:
Clear aligners l Crown and bridges l Implant-supported restorations l Full and partial dentures Orthodontics l Implant surgical guides l Sleep apnea devices l Dental models l 3D printing…
Our users have always been at the heart of all that we do, and we’re proud to have built a community that not only gives us constant feedback and suggestions but also actively supports and helps one another. For our efforts in community-building, we received the Best Community Support award at the iDD Intraoral Scanner Awards 2020.
But we didn’t just build a community. We also built a resource library for you to learn on the go. You can check out video tutorials on our Medit Academy YouTube channel or read help articles in our Help Center.
Beyond the training and support from our distribution partners, you can also reach out to our dedicated tech support team if you have any questions or encounter any issues.
This means that you never need to worry about being alone in your scanning journey. So what are you still waiting for?
Category | Medit i700 | |
Scanning technology | Scanning frame | Up to 70 FPS |
Imaging technology | 3D-in-motion video technology l 3D full color streaming capture | |
Light source | LED | |
Anti-fogging technology | Adaptive anti-fogging | |
Accuracy | Full-arch | 10.9μm ± 0.98 |
Handpiece | Dimensions | 248 x 44 x 47.4 mm |
Weight | 245 g | |
Tip | Tip size | 22.2 x 15.9 mm |
Mirror angle | 45-degree angle Easier to scan distal molar area | |
Scan area | 15 x 13 mm | |
Autoclavable | Up to 100 times Autoclave 121°C 30 mins l Autoclave 134°C 4 mins | |
Reversible tip | Yes | |
Special mode | Remote control mode | Yes |
UV-C disinfection | Yes | |
Cable | Length | 2.0 m / Handpiece Detachable |
Connectivity | USB 3.1 Gen1 (C Power Delivery) | |
Category | Laptop Recommended Desktop Recommended Intel Core i9 – 10980HK Intel Core i9 – 10900K AMD Ryzen 9 4900H/5900H AMD Ryzen 9 5900X |
CPU | |
RAM | 32 GB |
Graphic | Nvidia GeForce RTX 2070/2080/3070/3080/3090 Above 8GB (Not supporting Radeon) |
OS | Window 10 Pro 64-bit |
Through innovation and customer care, we drive the digital dentistry revolution. We believe that through addition of advanced scanning technology to digital dentistry we are giving dentists the tools they need to provide better care to their patients. As the scanning company most trusted by consumers, we work hard to create new, previously unimagined possibilities for scanning through better innovation and customer care.
